Wire Feeder Built-In Type - Chowel Corporation Ltd.

visitors: 5067

Chowel Corporation Ltd.
[Korea]

Address:
395-3 Mongnae-dong Ansan Gyeonggi-do 425-100 Korea

Phone:
82-31-4935057

Contact name:
Baekkyu Choi

Click to enlarge image

>> Features

Gas cylinder to be loaded on main power
Holding wire feeder built-in
Arc spot function
Easy control by using tap switching and diode
Input power shall be automatically cut off by protection circuit against over-duty
Efficiency rate three times higher then AC arc 300A high speed welding, needless slag removal
High efficiency rate reduce total cost, compared with AC arc 300A Labour, electric fee, wire and gas fee reduce 1/2 in a year in case of necessary welded metal used 50kg per month
Varieny kinds of welding mode chooseable such as, continuous, intermittent mode, spot welding mode, latch continuous welding mode
With low input can reduce electric fee compare with AC arc welding.

>> Specifications

***** POWER SOURCE**
MODEL		AM-180
Rated output current	A	180
Input voltage & Frequency	V	3-phase 220,380,440. 50/60Hz
Input capacity	kVA	4.5
Output current range	A	18 - 180
No load voltage range	V	20 - 36
Output voltage range	-	7 step
Control method	-	Diode rectifier with tap switching
Duty cycle	%	40
Power factor & Efficiency	%	85
Arc spot time	sec	0.2 - 2.5
Welding hold time	sec	0.2 - 2.5
Applicable electrode wire	mm²	0.8 - 1.2
Applicable wire spool	mm	Shaft dia.50xOutside dia.300xWidth 105
Wire feed rate	m/min	3.5 - 18
External dimension	mm	(W)340 x (H)630 x (D)770
Weight	kg	76
***** WELDING TORCH**
MODEL		CT-18CA
Rated output current	A	180
Applicable electrode wire size	mm	0.8, 0.9, 1.0 (option:1.2)
Duty cycle	%	60
Cable length	m	3
Weight	kg	4.5
***** CO2 REGULATOR**
MODEL		RG-CDHS
Out flow rate	liter/min	2 - 25
Outlet pressure	kgf/sq.	1 - 3